MP-Series Options

Compact4 and Compact4 Mobile

150mm Media Kit*
The 150 mm Media Kit makes it possible to use a 150mm media roll, instead of the standard 100mm roll.

Peel-Off Kit
The Peel-Off accessory separates labels from their carrier paper. The carrier paper is rolled up under the printer. (Only for use with 100mm rolls.)

Label Taken Sensor
Label Taken Sensor, is most often used together with the Peel-Off kit. The photo cell controls the print out so that a new label is printed only after the previous label has been removed.

Print Head Diagnostic-PHD for 200dpi*
PHD warns against missing dots on the print head. (PHD requires Labelpoint 4.49 or later versions.)

Heavy Duty Cutter*
The strong and rugged Heavy Duty Cutter cuts through material as thick as 180 μm. The cutter is only available for Compact 220/110V versions.

Tower Mounting Kit*
Two MP Compact4 printers can be stacked on top of each other. This is a great solution in areas with a lack of space and in situations where printing of different types of media is required.

Wall Mount Kit*
Enables wall mounting of the printer via a mounting plate on the underside of the printer.

* Not available for the Compact4 Mobile

Nova

Peel-Off Kit
The peel-off device separates the labels from the backing paper, which is rolled up behind the printer.

Big Roll with Peel-Off (4" Nova Only)
The Nova Big Roll Peel-Off device is used for large label rolls. It separates the labels from the backing paper, which is rolled up behind the printer.

215mm Media Kit
The 215 mm Kit makes it possible to use media rolls with diameters up to 215 mm.

LTS-Kit
The Label Taken Sensor (LTS) is often used in association with the Peel-Off Kit. Printing is controlled by a photocell. A new label is only printed once the previous label has been removed from the sensor.